Matrix Sparsh VP110

500 Matrix SPARSH VP110 User Guide
## Receiving of Multicast Paging ##
################################################################################
#######
#configures the codec of multicast paging(Sending).Codecs
PCMU,PCMA,G729,G722(Default),G726-32,G723_53.
multicast.codec =PCMU
#enables or disables the phone to handle the incoming multicast paging calls when
there is a multicast paging call on the phone.0-Disabled,1-Enabled (default)
multicast.receive_priority.enable =1
#configures the priority of multicast paging calls.1 is the highest priority, 10
is the lowest priority.The default value is 10.
multicast.receive_priority.prority =10
#It configures the listening multicast IP address and port number for the
phone.The default value is blank.IP address:port
multicast.listen_address.1.ip_address= 224.5.6.20:10008
#configures the label displayed on the LCD screen when receiving the multicast
paging. The default value is blank.String within 99 characters.
multicast.listen_address.1.label =Announcement1
################################################################################
#######
## Miscellaneous ##
################################################################################
#######
#enables or disables recent call in dialing feature. If it is enabled, you can
see the placed calls list when the phone is in the pre-dialing screen.0-
Disabled(default),1-Enabled
super_search.recent_call =0
################################################################################
#######
## Security ##