Matrix Sparsh VP110 User Manual

46 Matrix SPARSH VP110 User Guide
To configure DHCP via web user interface:
• Click on Network->Basic.
• In the IPv4 Config block, click DHCP.
• Click Confirm to save the change.
A dialog box pops up to prompt that settings will take effect after a reboot.
• Click OK to reboot the IP phone.
To configure static DNS address when DHCP is used via web user interface:
• Click on Network->Basic.
• In the IPv4 Config block, click DHCP.
• Click Static DNS.

Matrix Sparsh VP110 Specifications

General

Brand	Matrix
Model	Sparsh VP110
Category	IP Phone
Language	English