Matrix Sparsh VP110

54 Matrix SPARSH VP110 User Guide
To configure the transmission methods of Ethernet ports via web user interface:
• Click on Network->Advanced.
• Select the desired value from the WAN Port Link list.
• Select the desired value from the PC Port Link list.
ConfigurationFile <MAC>.cfg
Configurethetransmissionmethodsof
Ethernetports.
Formoreinformation,refer“Appendix
D‐ConfigurationParameters”.
Local WebUserInterface
Configurethetransmissionmethodsof
Ethernetports.
Navigateto:
http://<phoneIPAddress>/
servlet?p=network‐adv&q=load