Matrix Sparsh VP110

68 Matrix SPARSH VP110 User Guide
Procedure
Power indicator LED can be configured using the configuration files or locally.
To configure the power Indicator LED via web user interface:
• Click on Features->Power LED.
• Select the desired value from the Common Power Light On list.
• Select the desired value from the Ring Power Light Flash list.
• Select the desired value from the Voice/Text Mail Power Light Flash list.
• Select the desired value from the Mute Power Light Flash list.
• Select the desired value from the Hold/Held Power Light Flash list.
• Select the desired value from the Talk/Dial Power Light On list.
ConfigurationFile <MAC>.cfg
ConfigurethepowerindicatorLED.
Formoreinformation,refer“Appendix
D‐ConfigurationParameters”.
Local WebUserInterface
ConfigurethepowerindicatorLED.
Navigateto:http://<phoneIPAddress>/
servlet?p=features‐powerled&q=load