78 Matrix SPARSH VP110 User Guide
To select a ring tone for the account via web user interface:
• Click on Account->Basic.
• Select the desired ring tone from the Ring Type list.
If Common is selected, this account will use the ring tone selected for the phone. Refer to the above
instruction.
• Click Confirm to save the change.
A ring tone for the account is configurable via web user interface only.
To select a ring tone for the phone via phone user interface:
• Press Menu->Settings->Basic Settings->Ring Tones.
• Press
or to select the desired ring tone.
• Press the Save soft key to save the change or the Back soft key to cancel.
To upload a custom ring tone for your phone via web user interface:
• Click on Settings->Preference.
• Click Browse to locate a ring tone (file format must be *.wav) file from your local system.
To Next Page
Loading...
