INSTALLATION3 - 1
D-MAXE with OI-TS www.maxcessintl.comMI 2-292 1 C
3 INSTALLATION
Transport and storage – Modules of the D-MAXE system must be secured to prevent
them from slipping during transport.
– The modules must be kept cool, clean and dry.
– Operator interfaces OI-TS must not be stored close to
powerful magnetic fields. The electronic components of the
device could be damaged.
Scope of delivery –D-MAXE Controller
The model designation, serial number, and the firmware and
software numbers are on the rating plates on the housing.
– Operating Instructions
Option – Operator interface OI-TS
The model designation and the serial number are on the
rating plates on the housing. The firmware and software
numbers are affixed to the side of the housing (see
figure
3.4, page 3-5
).
– Fastening materials for wall mounting
– Fastening material for installation in panel
DATE OF MFR
MM-YYYY
NORTH AMERICA
222 WEST MEMORIAL ROAD
OKLAHOMA CITY, OK 73114
USA
TEL 1.405.755.1600
EUROPE
MAX-PLANCK-STRASSE 8
65779 KELKHEIM/TS.
GERMANY
Tel 49.6195.7002.0
CHINA
NO. 7 WAREHOUSING FACTORY
HENGLI INDUSTRIAL PARK
#5 LAND OF ZHUHAI
FREE TRADE ZONE
GUANGDONG PR 519030
CHINA
Tel 86.756.881.9398
WWW.MAXCESSINTL.COM
PART NO.
SERIAL NO.
29L21937X001
XXXXXXX
MODEL
D-MAXE #
D-MAX
TM
WEB GUIDE
UL/CSA 61010-1
IEC 61010-1
CONTROLLER
MFR
XXX
To Next Page
Loading...
Need help?
General
