OPERATING THE CONTROLLER5 - 6
D-MAXE with OI-TS www.maxcessintl.comMI 2-292 1 C
Servo-Center
menu Precondition:
"Servo-Center" operation mode is selected
∙ Press and release button 6 on the user level
Menus are available for setting up the parameters of the
servo-center transducer.
Not all menus are available in the "Servo-Center" operation
mode.
The
Polarity
menu is only available if the
Setup
menu is selected
in the "Manual" operation mode and then
4 Servo-Center
is
selected.
Buttons 1 Guidepoint
2Gain
3Polarity
Legend AExit menu
To Next Page
Loading...
