Maxcess FIFE D-MAXE 2 User Manual

INTRODUCTION 1 - 1
D-MAXE with OI-TSwww.maxcessintl.com MI 2-292 1 C
Einführung.fm
1 INTRODUCTION
About these operating
instructions These operating instructions describe the installation,
commissioning, operation and maintenance of the D-MAXE
system with an operator interface OI-TS and provide important
instructions for proper use.
These operating instructions are intended for both the system
construction master as well as the operator who uses the
D-MAXE system in production. The Operating Instructions must
be read and applied by everyone who is responsible for
commissioning, operating or maintaining the D-MAXE systems.
The Operating Instructions must be carefully kept and must
always be available throughout the service life of the D-MAXE
system.
Note:
These Operating Instructions describe basic operation of the
D-MAXE systems. Additions and customer-specific adaptations
are found in Supplementary Operating Instructions in the
system documentation.
If the customer's system consists of multiple D-MAXE
Controllers and/or operator interfaces, the instructions in these
Operating Instructions must be performed separately for each
module.
Translation of the original Operating Instructions:
These Operating Instructions are a translation. The original
Operating Instructions were composed in German.

Maxcess FIFE D-MAXE 2 Specifications

General

Brand	Maxcess
Model	FIFE D-MAXE 2
Category	Controller
Language	English