Maxcess FIFE D-MAXE 2 User Manual

MENUS: 1Y.8 NETWORK7 - 23
D-MAXE with OI-TS www.maxcessintl.comMI 2-292 1 C
1y.8 Network You can use these menus to view network settings and make
changes to them.
Operating modes:
– The buttons and input fields are available in all operational
modes.
MAXNET Settings Display and change the network settings for MAXNET:
– The MAXNET ID is used for addressing of individual D-MAXE
devices.
– The Cluster ID is used to
- operate identical systems in a network.
- operate more than 31 devices in a network
Note:
The MAXNET address/the MAXNET cluster address is only to be
changed in accordance with the appropriate instructions in
"Supplementary Operating Instructions" (see system
documentation) or following consultation with a member of staff
at Fife-Tidland GmbH.
MAXNET ID Cluster ID Use
Cannot be edited Not visible
A system distributed over several devices
and present once in the network
Cannot be edited
Visible and can be
edited
A system distributed over several devices
and present several times in the network
Can be edited
Visible and can be
edited
Grouped independent drives (more than 31
are possible)
Can be edited Not visible
Independent drives (maximum of 31
possible)

Maxcess FIFE D-MAXE 2 Specifications

General

Brand	Maxcess
Model	FIFE D-MAXE 2
Category	Controller
Language	English