Mazda 1983 RX7 - Warranty Information

REAR WINDOW DEFROSTER GRID LINE REPAIR PROCEDURE CAT. T, NO. 015/95
Article Text (p. 2)
1983 Mazda RX7
For www.iluvmyrx7.com
Copyright © 1998 Mitchell Repair Information Company, LLC
Monday, August 27, 2001 06:33AM
NOTE: Make sure both ends are aligned prior to attaching.
7. Shake the bottle of resin well.
CAUTION: Continuity failure will occur if the ingredients are not
mixed completely.
8. Brush on the resin overlapping both ends of the broken grid line.
NOTE: Use paint remover to clean brush for future applications.
9. Repeat application (total of 3 times) when the surface is tack-free
(approximately one (1) minute).
10. Allow to dry twenty (20) minutes.
11. Carefully peel stencil from glass.
12. Allow twenty-four (24) hours before activating rear defroster.
PARTS INFORMATION
PARTS INFORMATION TABLE
ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄ¿
³ Part Number ³ Description ³
ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄ´
³ 0000 88 5067 ³ Resin ³
ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÙ
WARRANTY INFORMATION
(Applies To Verified Customer Complaints On Vehicles Covered Under
Normal Warranty. Refer To The SRT Microfiche For Warranty Term
Information.)
Warranty Type: A
Symptom Code: D5
Damage Code: AA
Part Number Main Cause: 0000 88 5067
Quantity: 0
Operation Number: XX0777RX
Labor Hours: 0.3 Hrs.
END OF ARTICLE