Mazda 1983 RX7 - Sliding Clamp on Air Hose; Proper Check Valve Orientation

CATALYST PELLETS & MODIFICATION OF SECONDARY AIR SYS
Article Text (p. 10)
1983 Mazda RX7
For www.iluvmyrx7.com
Copyright © 1998 Mitchell Repair Information Company, LLC
Saturday, September 08, 2001 09:59AM
Fig. 8: Sliding Clamp on Air Hose (Air Control Valve Side)
4. Remove the air control valve and the air hose.
5. Remove the check valve from air control valve.
CAUTION: The check valve may fall out when ACV is removed. Be sure
to retrieve and set back in place before re-installing.
See Fig. 9.
Fig. 9: Proper Check Valve Orientation
6. Remove the cap and switching valve as shown in Fig. 10.