CATALYST PELLETS & MODIFICATION OF SECONDARY AIR SYS
Article Text (p. 11)
1983 Mazda RX7
For www.iluvmyrx7.com
Copyright © 1998 Mitchell Repair Information Company, LLC
Saturday, September 08, 2001 09:59AM
Fig. 10: Removing Cap and Switching Valve
7. Enlarge the hole as shown in Fig. 11 with the 4.2 mm drill
bit provided.
Fig. 11: Location of Hole for Enlargement
8. Blow the chips off with an air gun. See Fig. 12
To Next Page
Loading...
