CATALYST PELLETS & MODIFICATION OF SECONDARY AIR SYS
Article Text (p. 12)
1983 Mazda RX7
For www.iluvmyrx7.com
Copyright © 1998 Mitchell Repair Information Company, LLC
Saturday, September 08, 2001 09:59AM
Fig. 12: Blowing Chips off with Air Gun
9. Re-install the cap and switching valve removed in Step 6.
10. Re-install the check valve to the intake manifold.
CAUTION: Be sure to fit the check valve into the intake manifold.
NOTE: The check valve may fall out when ACV is removed. Be sure
to retrieve and set back in place before re-installing ACV.
See Fig. 13.
To Next Page
Loading...
