Mazda 1983 RX7 - Engine Stand Adaptor Modifications

ENGINE STAND ADAPTOR MODIFICATIONS CAT. 40, NO. 025/88
Article Text
1983 Mazda RX7
For www.iluvmyrx7.com
Copyright © 1998 Mitchell Repair Information Company, LLC
Saturday, September 08, 2001 09:18AM
ARTICLE BEGINNING
TECHNICAL SERVICE BULLETIN
ENGINE STAND ADAPTOR MODIFICATION
Model: All Models
Bulletin No.: 023/88
Date: 10/28/88
Category: 40
DESCRIPTION
With the introduction of universal engine hanger (49L0-10-1A0), a
slight modification will be necessary on some types of engine stand
adaptors.
If you currently use engine stand adaptor 0000-41-001C or 0000-41-
001R, the following modifications is needed to obtain adequate bolt
clearance for the universal engine hanger. If you use the older style
engine stand adaptor (0000-41-001H), no modification is required.
Fig. 1: Engine Stand Adaptor Modification
END OF ARTICLE