CATALYST PELLETS & MODIFICATION OF SECONDARY AIR SYS
Article Text (p. 21)
1983 Mazda RX7
For www.iluvmyrx7.com
Copyright © 1998 Mitchell Repair Information Company, LLC
Saturday, September 08, 2001 09:59AM
18. Fill out the recall label with your dealer code and the
repair date, then affix this label on the passenger side's
door. See Fig. 26.
NOTE: For the 1982 RX-7, please confirm that the recall label
(Campaign No. 21605) has been already attached on the inside
passenger side's B pillar. If no label, please replace the
charcoal canister in accordance with the repair procedure
in the letter of "Recall Campaign Number 21605, 1982 RX-7
Evaporative Emission System."
Fig. 26: Location to Affix Recall Label
19. Remove the drain plug No. 1 of the converter removed from the
customer's vehicle and remove all pellets from the converter.
20. Put all old pellets (i.e., any leftover pellets from both of
the front and rear compartments of the converter) into the
plastic bag which originally contained the new pellets.
21. Fill out the warranty tag with all necessary information
and attach it to the bag containing the old pellets. See
Fig. 27.
Fig. 27: Tagging Returnable Pellets
22. Put 2 packs of the old pellets into the carton box which
To Next Page
Loading...
