COOLING SYSTEM
01–12–2
COOLING SYSTEM FLOW DIAGRAM [LF]
E5U011200000N03
End Of Sie
COOLING SYSTEM CAP, COOLANT RESERVE TANK CONSTRUCTION [LF]
E5U011215201N02
• A low-pressure type cap has been adopted for the cooling system. It is installed on the coolant reserve tank to
improve serviceability when adding engine coolant and bleeding air.
• A degassing type coolant reserve tank has been
adopted, to integrate the simple airtight sub-tank
and the air/water separating tank, improving the
air/water separating function. The integrated and
large-size degassing tank consists of a labyrinth
structure with internal barriers to lengthen the
distance to the outlet and reduce the flow speed
to lengthen the time the engine coolant has to
accumulate, improving the air/water separation
function.
End Of Sie
CYLINDER BLOCK
CYLINDER HEAD
HEATER
RADIATOR
COOLANT
RESERVE TANK
WATER
PUMP
THERMOSTAT
EGR
VALVE
THROTTLE
BODY
COOLANT FLOW
DIRECTION
E5U112ZS5002
COOLANT RESERVE TANK
COOLING SYSTEM CAP
FROM WATER
OUTLET
FROM RADIATOR
TO RADIATOR
BARRIER
COOLANT FLOW
DIRECTION
E5U112ZS5003
To Next Page
Loading...
