COOLING SYSTEM
01–12–3
01–12
RADIATOR CONSTRUCTION [LF]
E5U011215200N01
• A cross-flow radiator with corrugated fins is used
to improve cooling performance.
• The radiator tanks are made of plastic and the
core is made of aluminum for weight reduction.
• Four rubber-insulated mounting brackets are
utilized to decrease vibration.
• To improve both the cooling ability and allow the
sporty design, the radiator is designed to tilt
forward to reduce the height and to take in the air
from the inlet installed under the bumper.
• The radiator has an ATF cooler in the right side
radiator tank. (AT)
End Of Sie
THERMOSTAT CONSTRUCTION/OPERATION [LF]
E5U011215171N01
Construction
• A wax-type thermostat with a jiggle-valve has been adopted.
Operation
• When the engine coolant temperature reaches 80—84 °C {176—183 °F}, the valve starts opening to allow
engine coolant to flow from the radiator stabilizing the engine coolant temperature. When the engine coolant
temperature decreases to approx. 75 °C {167 °F}, the valve closes to stop the engine coolant flow from the
radiator.
End Of Sie
CORE
TANKTANK
E5U112ZS5004
ENGINE SIDE
COOLANT FLOW DIRECTION
THERMOSTAT
FROM HEATER HOSE
FROM LOWER RADIATOR HOSE
THERMOSTAT COVER
E5U112ZS5005
To Next Page
Loading...
