Page 4 - 14 TA3H, TA3SH & TA3.5SH
4. Description
Table 4.1 - Dashboard Symbol Description (continued)
Symbol Name Description
Instruction - Start
Inhibitor
This instruction informs the operator that they
must sit on the seat before the engine will start.
A start inhibitor is fitted which prevents the
engine being started unless the operated is
seated.
Switch Instruction -
Direction Indicator
When fitted, this instruction informs the
Operator in which direction to move the switch
in order to operate the LEFT and RIGHT
direction indicators
Switch - Hazard
Warning Lights
When fitted, the hazard warning light switch will
cause all four indicator lights to flash and is
used to warn others the machine is
experiencing problems and should be given
special attention.
Switch - Lighting -
When fitted
This switch will turn the headlights and front,
rear side lights on and off.
Instruction - Engine
Start Key Switch
This instruction shows the start key position to
use when the engine cold start aid is required.
III
To Next Page
Loading...
