Page 7 - 4 TA3H, TA3SH & TA3.5SH
7. Standard Operating Procedures
Figure 7.4. - Backrest Angle
1. Adjustment Lever
(4) Seat belt
Refer to Figure 7.5. Sit on the seat, place the seat belt across the hips and insert the latch (3)
into the buckle (1) until it locks into position.
Adjust by pulling the belt through buckle (B) until it is a firm, comfortable fit across the hips.
To remove the seat belt, press the button (2) and lift the latch (3) out of the buckle (1).
Figure 7.5. - Seat Belt
1. Buckle
2. Button
3. Latch
COV0009
1
COV0063
1
2
3
To Next Page
Loading...
