HELIOS LED Processing Platform - USER GUIDE
30
Sync -(Advanced)
HELIOS has hidden Sync controls under the Advanced Mode toggle. Enable Advanced Mode under Settings → Processor
settings → Advanced, to reveal the hidden controls, then return to the Sync panel to use them.
Figure 37: Advanced Sync settings
NanoSync (Advanced)
HELIOS NanoSync gives users the most accurate sync control of any LED system. HELIOS synchronizes the actual light
output of the LED tile to the source within 1/4 microsecond (250 nanoseconds). Often HELIOS delivers frames much faster
than other equipment such as projectors. Cameras can also require precise alignment to match with the shutter exposure.
No Input signal frequency (Hz) - (Advanced)
If the inbound signal is ever lost, HELIOS will continue to output test patterns at the frame rate of the last valid input. There
are some cases where it is useful to toggle Auto off in order to set the output frequency manually so that test patterns are
generated at the frequency of a future valid signal before it arrives.
To Next Page
Loading...
