FOCKE MELER GLUING SOLUTIONS
A-12
AIRTIGHT LID
Accesories
Level control system
The level of the hot-melt is done with an capative detector and the warning is
through a light tower.
Air drying system for PUR adhesives
Polyurethane-based reactive adhesives, known as P.U.R. (reactive
polyurethanes), require a completely dry environment before they can be
applied, since when they come in contact with atmospheric humidity, they
reticulate, hardening quickly.
The B4 VS WITH AIR TIGHT LID melting equipment ensures a dry environment
thanks to the addition of an air-drying system to these models, which provides
a level of dehumidification above 99.98%. This guarantees that the adhesive
is preserved without premature reticulations inside the applicator unit. The
installation of the electro-pneumatic control is a standard in all versions. You
can choose if you want to order the air-dryer assembly (two filters and the
dryer membrane) or not.
Dimensions
Melting unit
384
470
445
320
494
600
681
To Next Page
Loading...
