Meler Micron + 10 - 2 Introduction

MA-5162-ENG MICRON
+
PISTON ADHESIVE MELTERINTRODUCTION
2-1
2. INTRODUCTION
In this manual you will find information about the installation, use and
maintenance of the hot-melt adhesive melter/applicator in meler’s MICRON+
series.
The ‘MICRON+’ series includes the 5, 10, 20 and 35 liter range of hot-melt
adhesive melters/applicators.
Most of the photographs and illustrations that appear in this manual refer
to the 5-liter ‘MICRON+’ melter/applicator. This model has been used as
a reference for writing this manual as its main characteristics, with the
exception of the tank capacity and the connection outputs are the same as
those in the rest of the ‘MICRON+’ series.