FOCKE MELER GLUING SOLUTIONS TABLE OF CONTENTS
3. INSTALLATION 3-1
Introduction 3-1
Installation requirements 3-1
Electrical Consumption 3-2
Compressed air 3-2
Other factors 3-3
Unpacking 3-3
Contents 3-3
Mounting the equipment 3-3
Electrical power connection 3-4
Pneumatic connection 3-5
Hose and applicator connection 3-6
Parameter Programming 3-6
External I/O connections 3-7
Connecting external inputs and outputs 3-9
Connecting zone inhibition 3-10
ModBus communications 3-11
Automatic feeder assembly 3-14
Pneumatic connection 3-14
Suction tube connection 3-14
Placing the suction tube 3-14
Electrical connections 3-15
4. MELTER OPERATION 4-1
General information 4-1
Filling the tank 4-2
Starting up the melter equipment 4-2
Manual pumping permmision 4-3
Melter equipment display 4-4
Date and time Menu 4-4
To Next Page
Loading...
