FOCKE MELER GLUING SOLUTIONS TABLE OF CONTENTS
‘3. Load’ Menu 4-20
Screen 1: Minimum adhesive level sensor 4-20
Screen 2: Automatic adhesive feeder 4-20
‘4. Statistics’ Menu 4-20
Standby function 4-21
Turning off the melter equipment 4-21
Use of the automatic feeder 4-22
Start up and automatic process 4-22
Sensitivity adjustment 4-23
Positioning of the level sensor 4-23
Application for PC 4-24
5. MAINTENANCE 5-1
Equipment cleaning 5-1
System depressurisation 5-2
Access to pneumatic unit 5-3
Filter maintenance 5-3
Cleaning the tank 5-4
Changing adhesive type. 5-4
Cleaning burnt adhesive 5-5
Emptying the tank 5-5
Safety Thermostat 5-6
Remove the equipment from its base 5-6
Automatic feeder maintenance 5-7
Cleaning of the unit 5-7
Pneumatic system 5-7
Control of the load sensor 5-8
Inspection of the aspiration tube 5-8
Filter maintenance 5-8
Control of pneumatic vibrator 5-8
To Next Page
Loading...
