Workstation 5 Field Service Guide 3-7
Workstation 5 Troubleshooting
Operational Troubleshooting
A WS5 running Windows Embedded CE will use a 256M USB
Flash Drive, a single 256M DIMM, and a 256M CF Card. From the
menu, select “Reset CMOS to WINCE defaults,” and press [Enter].
Select ‘Y’ to confirm and restart the unit.
o You should enter BIOS Setup and program the Time and Date
fields.
If the unit refuses to boot after performing the above procedure, the
system board and or USB Flash Drive is defective.
To Next Page
Loading...