Miele S 528 - Cord Reel Removal; Cord Removal; Figure 030-8: Cord Reel Removal

Technical Information
50
S 500 & S 600 Canister Vacuums
4.3 Cord Reel Removal
Note:
The cord reel may only be replaced as a complete assembly.
1. Remove the casing top; see Section 020-4.2.
2. Remove the cap; see Section 030-4.1.
3. Remove the cover frame; see Section 020-4.5.
4. Remove the cord reel retaining screw.
5. Disconnect the 2 plug contacts; see Figure 030-8, Item 1.
6. Disconnect the hose (Figure 030-8, Item 3) from the cord reel.
7. Press out the hinge socket (Figure 030-8, Item 2) from its anchor on the
cord reel.
8. Remove the cord reel.
Figure 030-8: Cord Reel Removal
Note:
Before installing the casing top, insert the power cord through its opening.
4.4 Cord Removal
Note:
Use only a genuine Miele cord for the correct vacuum model number.
Note:
Never replace the cord end.
1. Remove the cord reel. See Section 030-4.3.
2. Unwind the cord completely. See Figure 030-9.