Milestone Srl MA213-003 – DMA-80 EVO – User Manual
9
2 INSTALLATION
2.1 Unpacking and checking list
When unpacking, verify that all parts received
correspond to the packing list.
Carefully cut the tie down straps, as shown in the
next picture. Cut through the packing tape and
open the carton from the top.
Remove the smaller boxes located in the upper
part of the main box and set them aside. They
contain accessories, which will be needed during
the installation of the DMA-80 EVO. Lift the main
box up off of the pallet to expose and facilitate
removal of the DMA-80 EVO.
To Next Page
Loading...
