Milestone Srl MA213-003 – DMA-80 EVO – User Manual
20
Place the red cover taking it from the blue
accessories case
Perform the catalyst initialization procedure to
prepare the catalyst tube to the analysis. See
chapter 8.7
2.3 DMA-80 EVO SETUP
The DMA-80 EVO system must be installed in a well ventilated, dust free room, free from acid
vapours or highly corrosive chemical atmosphere. Aggressive vapours can attack the system
through its ventilation openings and cause heavy damage to the electronic boards, plugs, etc.
The optimal placement is in an air-conditioned room with approx. 20 °C (± 3 °C).
Install the amalgamator and catalyst before proceeding with DMA-80 EVO SETUP (see chapter
2.2).
To Next Page
Loading...
