Milestone Srl MA213-003 – DMA-80 EVO – User Manual
13
2.2 CATALYST AND AMALGAMATOR INSTALLATION
Before working with DMA- components,wear:
-Mask anti dust FPP3;
-Disposables gloves
Protection for the shoes.
For safety reason the catalyst and amalgamator are packed separately to the DMA-80 unit so they need
to be installed as first step.
Attention = HOT components
Put the machine on the working table and with
the help of key, open the housing cover.
Release the remaining pressure from the gas
connector on the back side of the unit
To Next Page
Loading...
