OM-284794 Page 11
F
Complete Parts List is available at www.MillerWelds.com
OM-
Use ventilating fan to remove fumes.
Safe10 2012 05
Use ventilating fan to remove fumes.
Safe11 2012 05
Keep flammables away from welding. Do not weld near flammables.
Safe12 2012 05
Keep flammables away from cutting. Do not cut near flammables.
Safe13 2012 05
Welding sparks can cause fires. Have a fire extinguisher nearby, and have a watchperson ready to use it.
Safe14 2012 05
Cutting sparks can cause fires. Have a fire extinguisher nearby, and have a watchperson ready to use it.
Safe15 2012 05
Do not weld on drums or any closed containers.
Safe16 2017 04
Do not cut on drums or any closed containers.
Safe17 2017 04
Do not grip material near cutting path.
Safe18 2017 10
Turn off power before disassembling torch.
Safe19 2012 05
Do not remove or paint over (cover) the label.
Safe20 2017 04
Do not weld on drums or any closed containers.
OM-
U
se ventilating fan to remove fumes.
Safe10 2012 05
Use ventilating fan to remove fumes.
Safe11 2012 05
Keep flammable
s away from welding. Do not weld near flammables.
Safe12 2012 05
Keep flammable
s away from cutting. Do not cut near flammables.
Safe13 2012 05
W
elding
s
parks can cause fires. Have a fire extinguisher nearby, and have a watchperson ready to use it.
Safe14 2012 05
Cutting sparks can cause fires. Have a fire extinguisher nearby, and have a watchperson ready to use it.
Safe15 2012 05
D
o not weld on drums or any closed containers.
Safe16 2017 04
D
o not cut on drums or any closed containers.
Safe17 2017 04
D
o not grip material near cutting path.
Safe18 2017 10
T
urn off power before disassembling torch.
Safe19 2012 05
Do not remove or paint over (cover) the label.
Safe20 2017 04
Do not remove or paint over (cover) the label.
OM-
Do not work on unit if engine is running. Stop engine first.
Safe21 2017 04
Do not smoke while fueling or if near fuel.
Safe22 2017 04
Stop engine before fueling.
Safe23 2017 04
Do not fuel a hot engine.
Safe24 2017 04
Use lift eye to lift unit and properly installed accessories only, not gas cylinders. Do not exceed maximum lift eye
rating (see Specifications).
Safe25 2012 05
When power is applied failed parts can explode or cause other parts to explode.
Safe26 2012 05
Flying pieces of parts can cause injury. Always wear a face shield when servicing unit.
Safe27 2012 05
Always wear long sleeves and button your collar when servicing unit.
Safe28 2012 05
After taking proper precautions as shown, connect power to unit.
Safe29 2012 05
Disconnect input plug or power before working on machine.
Safe30 2012 05
When power is applied failed parts can explode or cause other parts
to explode.
OM-
Do not work on unit if engine is running. Stop engine first.
Safe21 2017 04
Do not smoke while fueling or if near fuel.
Safe22 2017 04
Stop engine before fueling.
Safe23 2017 04
Do not fuel a hot engine.
Safe24 2017 04
Use lift eye to lift unit and properly installed accessories only, not gas cylinders. Do not exceed maximum lift eye
rating (see Specifications).
Safe25 2012 05
When power is applied failed parts can explode or cause other parts to explode.
Safe26 2012 05
Flying pieces of parts can cause injury. Always wear a face shield when servicing unit.
Safe27 2012 05
Always wear long sleeves and button your collar when servicing unit.
Safe28 2012 05
After taking proper precautions as shown, connect power to unit.
Safe29 2012 05
Disconnect input plug or power before working on machine.
Safe30 2012 05
Flying pieces of parts can cause injury. Always wear a face shield
when servicing unit.
OM-
Do not work on unit if engine is running. Stop engine first.
Safe21 2017 04
Do not smoke while fueling or if near fuel.
Safe22 2017 04
Stop engine before fueling.
Safe23 2017 04
Do not fuel a hot engine.
Safe24 2017 04
Use lift eye to lift unit and properly installed accessories only, not gas cylinders. Do not exceed maximum lift eye
rating (see Specifications).
Safe25 2012 05
When power is applied failed parts can explode or cause other parts to explode.
Safe26 2012 05
Flying pieces of parts can cause injury. Always wear a face shield when servicing unit.
Safe27 2012 05
Always wear long sleeves and button your collar when servicing unit.
Safe28 2012 05
After taking proper precautions as shown, connect power to unit.
Safe29 2012 05
Disconnect input plug or power before working on machine.
Safe30 2012 05
Always wear long sleeves and button your collar when servicing unit.
OM-
Do not work on unit if engine is running. Stop engine first.
Safe21 2017 04
Do not smoke while fueling or if near fuel.
Safe22 2017 04
Stop engine before fueling.
Safe23 2017 04
Do not fuel a hot engine.
Safe24 2017 04
Use lift eye to lift unit and properly installed accessories only, not gas cylinders. Do not exceed maximum lift eye
rating (see Specifications).
Safe25 2012 05
When power is applied failed parts can explode or cause other parts to explode.
Safe26 2012 05
Flying pieces of parts can cause injury. Always wear a face shield when servicing unit.
Safe27 2012 05
Always wear long sleeves and button your collar when servicing unit.
Safe28 2012 05
After taking proper precautions as shown, connect power to unit.
Safe29 2012 05
Disconnect input plug or power before working on machine.
Safe30 2012 05
After taking proper precautions as shown, connect power to unit.
OM-
Do not work on unit if engine is running. Stop engine first.
Safe21 2017 04
Do not smoke while fueling or if near fuel.
S
afe22 2017
0
4
Stop engine before fueling.
Safe23 2017 04
Do not fuel a hot engine.
Safe24 2017 04
Use lift eye to lift unit and properly installed accessories only, not gas cylinders. Do not exceed maximum lift eye
rating (see Specifications).
Safe25 2012 05
When power is applied failed parts can explode or cause other parts to explode.
Safe26 2012 05
Flying pieces of parts can cause injury. Always wear a face shield when servicing unit.
Safe27 2012 05
Always wear long sleeves and button your collar when servicing unit.
Safe28 2012 05
After taking proper precautions as shown, connect power to unit.
Safe29 2012 05
Disconnect input plug or power before working on machine.
Safe30 2012 05
Disconnect input plug or power before working on machine.
OM-
Do not use one handle to lift or support unit.
Safe31 2017 04
Writer: If necessary, replace the word “handle” with “lift eye’.
Drive rolls can injure fingers.
Safe32 2012 05
Welding wire and drive parts are at welding voltage during operation keep hands and metal objects away.
Safe33 2017 04
Consult rating label for input power requirements.
Safe34 2012 05
Become trained and read the instructions and labels before working on machine.
Safe35 2012 05
Connect Green Or Green/Yellow grounding conductor to ground terminal first.
Connect input conductors (L1, L2, L3) to line terminals.
Safe36 2012 05
Wear hat and safety glasses. Use ear protection and button shirt
collar. Use welding helmet with correct shade of filter. Wear complete
body protection.
Safe38 2012 05
Wear hat and safety glasses. Use ear protection and button shirt
collar. Use welding helmet with correct shade of filter. Wear complete
body protection.
Safe39 2012 05
Become trained and read the instructions before working on the
machine or welding.
Safe40 2012 05
Become trained and read the instructions before working on the
machine or cutting.
Safe41 2012 05
Do not use one handle to lift or support unit.
OM-
1-1. Additional Safety Symbols And Definitions
Some symbols are found only on CE products.
Warning! Watch Out! There are possible hazards as shown by the symbols.
Safe1 2012 05
Do not discard product (where applicable) with general waste.
Reuse or recycle Waste Electrical and Electronic Equipment (WEEE) by disposing at a designated collection
facility.
Contact your local recycling office or your local distributor for further information.
Safe37 2017 04
Wear dry insulating gloves. Do not touch electrode with bare hand. Do not wear wet or damaged gloves.
Safe2 2017 04
Protect yourself from electric shock by insulating yourself from work and ground.
Safe3 2017 04
Protect yourself from electric shock by insulating yourself from work and ground.
Safe4 2017 04
Disconnect input plug or power before working on machine.
Safe5 2017 04
Keep your head out of the fumes.
Safe6 2017 04
Keep your head out of the fumes
Safe7 2017 04
Use forced ventilation or local exhaust to remove the fumes.
Safe8 2012 05
Use forced ventilation or local exhaust to remove the fumes.
Safe9 2012 05
Do not discard product (where applicable) with general waste.
Reuse or recycle Waste Electrical and Electronic Equipment (WEEE)
by disposing at a designated collection facility.
Contact your local recycling office or your local distributor for further
information.
OM-
Do not use one handle to lift or support unit.
Safe31 2017 04
Writer: If necessary, replace the word “handle” with “lift eye’.
Drive rolls can injure fingers.
Safe32 2012 05
Welding wire and drive parts are at welding voltage during operation keep hands and metal objects away.
Safe33 2017 04
Consult rating label for input power requirements.
Safe34 2012 05
Become trained and read the instructions and labels before working on machine.
Safe35
2012
05
Connect Green Or Green/Yellow grounding conductor to ground terminal first.
Connect input conductors (L1, L2, L3) to line terminals.
Safe36 2012 05
Wear hat and safety glasses. Use ear protection and button shirt
collar. Use welding helmet with correct shade of filter. Wear complete
body protection.
Safe
38 2012
05
Wear hat and safety glasses. Use ear protection and button shirt
collar. Use welding helmet with correct shade of filter. Wear complete
body protection.
Safe39 2012 05
Become trained and read the instructions before working on the
machine or welding.
Safe40 2012 05
Become trained and read the instructions before working on the
machine or cutting.
Safe41 2012 05
Wear hat and safety glasses. Use ear protection and button shirt col-
lar. Use welding helmet with correct shade of filter. Wear complete
body protection made from leather or flame-resistant clothing (FRC).
Body protection includes oil-free clothing such as leather gloves,
heavy shirt, cuffless trousers, high shoes, and a cap.
To Next Page
Loading...
