OM-284794 Page 10
F
Complete Parts List is available at www.MillerWelds.com
SECTION 3 – DEFINITIONS
3-1. Additional Safety Symbol Definitions
F
Some symbols are found only on CE products.
Warning! Watch Out! There are possible hazards as shown by the
symbols.
OM-
1-1. Additional Safety Symbols And Definitions
Some symbols are found only on CE products.
Warning! Watch Out! There are possible hazards as shown by the symbols.
Safe1 2012 05
Do not discard product (where applicable) with general waste.
Reuse or recycle Waste Electrical and Electronic Equipment (WEEE) by disposing at a designated collection
facility.
Contact your local recycling office or your local distributor for further information.
Safe37 2017 04
Wear dry insulating gloves. Do not touch electrode with bare hand. Do not wear wet or damaged gloves.
Safe2 2017 04
Protect yourself from electric shock by insulating yourself from work and ground.
Safe3 2017 04
Protect yourself from electric shock by insulating yourself from work and ground.
Safe4 2017 04
Disconnect input plug or power before working on machine.
Safe5 2017 04
Keep your head out of the fumes.
Safe6 2017 04
Keep your head out of the fumes
Safe7 2017 04
Use forced ventilation or local exhaust to remove the fumes.
Safe8 2012 05
Use forced ventilation or local exhaust to remove the fumes.
Safe9 2012 05
Wear dry insulating gloves. Do not touch electrode with bare hand.
Do not wear wet or damaged gloves.
OM-
1-1. Additional Safety Symbols And Definitions
Some symbols are found only on CE products.
Warning! Watch Out! There are possible hazards as shown by the symbols.
Safe1 2012 05
Do not discard product (where applicable) with general waste.
Reuse or recycle Waste Electrical and Electronic Equipment (WEEE) by disposing at a designated collection
facility.
Contact your local recycling office or your local distributor for further information.
Safe37 2017 04
Wear dry insulating gloves. Do not touch electrode with bare hand. Do not wear wet or damaged gloves.
Safe2 2017 04
Protect yourself from electric shock by insulating yourself from work and ground.
Safe3 2017 04
Protect yourself from electric shock by insulating yourself from work and ground.
Safe4 2017 04
Disconnect input plug or power before working on machine.
Safe5 2017 04
Keep your head out of the fumes.
Safe6 2017 04
Keep your head out of the fumes
Safe7 2017 04
Use for
ced ventilation or local exhaust to remove the fumes.
Safe8 2012 05
Use forced
ventilation or local exhaust to remove the fumes.
Safe9 2012 05
Protect yourself from electric shock by insulating yourself from work
and ground.
OM-
1-1. Additional Safety Symbols And Definitions
S
ome
s
ymbols are found only on CE products.
Warning! Watch Out! There are possible hazards as shown by the symbols.
S
afe1 2012
0
5
Do not discard product (where applicable) with general waste.
Reuse or recycle Waste Electrical and Electronic Equipment (WEEE) by disposing at a designated collection
facility.
Contact your local recycling office or your local distributor for further information.
S
afe37 2017
0
4
Wear dry insulating gloves. Do not touch electrode with bare hand. Do not wear wet or damaged gloves.
Safe2 2017 04
Protect yourself from electric shock by insulating yourself from work and ground.
Safe3 2017 04
Protect yourself from electric shock by insulating yourself from work and ground.
Safe4 2017 04
Disconnect input plug or power before working on machine.
Safe5 2017 04
Keep your head out of the fumes.
Safe6 2017 04
K
eep
y
our head out of the fumes
Safe7 2017 04
Use forced ventilation or local exhaust to remove the fumes.
Safe8 2012 05
Use forced ventilation or local exhaust to remove the fumes.
Safe9 2012 05
Disconnect input plug or power before working on machine.
OM-
1-1. Additional Saf
ety Symbols And Definitions
Some symbols are found only on CE products.
Wa
rning! Watch Out!
Th
ere are possible hazards as shown by the symbols.
Safe1 2012 05
Do not discard product (where applicable) with general waste.
Reuse or recycle Waste Electrical and Electronic Equipment (WEEE) by disposing at a designated collection
fa
cility.
C
ontact your local recycling office or your local distributor for further information.
Safe37 2017 04
We
ar dry insulating gloves. Do not touch electrode with bare hand. Do not wear wet or damaged gloves.
Safe2 2017 04
Pro
tect
you
rself from electric shock by insulating yourself from work and ground.
Safe3 2017 04
Protect yourself from electric shock by insulating yourself from work and ground.
Safe4 2017 04
Disconnect input plug or power before working on machine.
Safe5 2017 04
Keep your head out of the fumes.
Safe6 2017 04
Keep your head out of the fumes
Safe7 2017 04
Use forced ventilation or local exhaust to remove the fumes.
Safe8 2012 05
Use forced ventilation or local exhaust to remove the fumes.
Safe9 2012 05
Keep your head out of the fumes.
OM-
1-1. Additional Safety Symbols And Definitions
Some symbols are found only on CE products.
Warning! Watch Out! There are possible hazards as shown by the symbols.
Safe1 2012 05
Do not discard product (where applicable) with general waste.
Reuse or recycle Waste Electrical and Electronic Equipment (WEEE) by disposing at a designated collection
facility.
Contact your local recycling office or your local distributor for further information.
Safe37 2017 04
Wear dry insulating gloves. Do not touch electrode with bare hand. Do not wear wet or damaged gloves.
Safe2 2017 04
Protect yourself from electric shock by insulating yourself from work and ground.
Safe3 2017 04
Protect yourself from electric shock by insulating yourself from work and ground.
Safe4 2017 04
Disconnect input plug or power before working on machine.
Safe5 2017 04
Keep your head out of the fumes.
Safe6 2017 04
Keep your head out of the fumes
S
afe7 2017
0
4
Use forced ventilation or local exhaust to remove the fumes.
Safe8 2012 05
Use forced ventilation or local exhaust to remove the fumes.
Safe9 2012 05
Use forced ventilation or local exhaust to remove the fumes.
OM-
Use ventilating fan to remove fumes.
Safe
10 2012
05
Use ventilating fan to remove fumes.
Safe11 2012 05
Keep flammables away from welding. Do not weld near flammables.
Safe12 2012 05
Keep flammables away from cutting. Do not cut near flammables.
Safe13 2012 05
Welding sparks can cause fires. Have a fire extinguisher nearby, and have a watchperson ready to use it.
Safe14 2012 05
Cutting sparks can cause fires. Have a fire extinguisher nearby, and have a watchperson ready to use it.
Safe15 2012 05
Do not weld on drums or any closed containers.
Safe16 2017 04
Do not cut on drums or any closed containers.
Safe17 2017 04
Do not grip material near cutting path.
Safe18 2017 10
Turn off power before disassembling torch.
Safe19
2012
05
Do not remove or paint over (cover) the label.
Safe20 2017 04
Use ventilating fan to remove fumes.
OM-
Use ventilating fan to remove fumes.
Safe10 2012 05
Use ventilating fan to remove fumes.
Safe11 2012 05
Keep flammables away from welding. Do not weld near flammables.
Safe12 2012 05
Keep flammables away from cutting. Do not cut near flammables.
Safe13 2012 05
Welding sparks can cause fires. Have a fire extinguisher nearby, and have a watchperson ready to use it.
Safe14 2012 05
Cutting sparks can cause fires. Have a fire extinguisher nearby, and have a watchperson ready to use it.
Safe15 2012 05
Do not weld on drums or any closed containers.
Safe16 2017 04
Do not cut on drums or any closed containers.
Safe17 2017 04
Do not grip material near cutting path.
Safe18 2017 10
Turn off power before disassembling torch.
Safe19 2012 05
Do not remove or paint over (cover) the label.
Safe20 2017 04
Keep flammables away from welding. Do not weld near flammables.
OM-
Use ventilating fan to remove fumes.
Safe10 2012 05
Use ventilating fan to remove fumes.
Safe11 2012 05
Keep flammables away from welding. Do not weld near flammables.
Safe12 2012 05
Keep flammables away from cutting. Do not cut near flammables.
Safe13 2012 05
Welding sparks can cause fires. Have a fire extinguisher nearby, and have a watchperson ready to use it.
Safe14 2012 05
Cutting sparks can cause fires. Have a fire extinguisher nearby, and have a watchperson ready to use it.
Safe15 2012 05
Do not weld on drums or any closed containers.
Safe16 2017 04
Do not cut on drums or any closed containers.
Safe17 2017 04
Do not grip material near cutting path.
Safe18 2017 10
Turn off power before disassembling torch.
Safe19 2012 05
Do not remove or paint over (cover) the label.
Safe20 2017 04
Welding sparks can cause fires. Have a fire extinguisher nearby, and
have a watchperson ready to use it.
To Next Page
Loading...
