MIMAKI UJV-160 - Cleaning the Flushing Tray

4-8
Cleaning the flushing tray
Replace the flushing filter in the flushing tray once a month.
1
Turn the power OFF with the power
switch.
2
Move the carriage to the right.
• Move the carriage with the keys.
3
Wipe out ink on the surface of the
flushing tray.
• Wipe out ink that has adhered by flushing on the
flushing tray with cloth.
Contents of the
cleaning kit
• F-200 Cleaning kit
(SPC-0568)
• Flushing filter
(SPC-0577)
• Gloves • Paper towel • Goggles
• When replacing, be sure to put on the supplied goggles and gloves, since you may get ink in
your eyes.
• Replace the flushing filter (waste ink absorber) about once a month. If it absorbed more than
its capacity, ink may overflow.
Power switch
Carriage