MIMAKI UJV-160 - Preventing Nozzle Missing While Power-Off

2-8
Preventing nozzle missing while power-off
Even while the power switch is off, the machine starts periodically and executes various functions to prevent
nozzle missing. (Supported from the firmware ver.1.90)
1
When you start up the machine from
the sleep mode, the sleep operation is
performed, and the power switch is
turned off automatically.
• The sleep operation is completed in about 30 min.
• After “POWER OFF PLEASE WAIT” was displayed,
the power switch is turned off automatically.
• Do not turn off the power switch at startup from the sleep mode. When the sleep operation has
been completed, the machine turns off the power switch automatically.
• Cleaning is not performed.
• Ink has not been consumed.
• Until two hours have passed after the power switch was turned off, the machine starts every
10 min.
When two hours or more have passed after the power switch was turned off, the machine
starts every one hour.
UJV - 160 s t a r t - up
ver . * . * *
PLEASE WA I T
POWER OFF
PLEASE WA I T