MIMAKI UJV-160 - Changing the Heater Setting; Changing the Heater Temperature Setting

3-11
3
Useful Function
Changing the heater setting
Changing the heater temperature setting
Set each item of [SET TEMP].
1
When <LOCAL> is displayed, press the
key.
2
Press the key.
3
Select the type 1 to 4 with the or
key, and press the key.
4
Select the [HEATER] with the
key, and press the key twice.
5
Set each heater temperature, and press
the key.
(1)Select the heater with the key.
(2)Set the temperature with the key.
6
Press the key to finish.
SET TEMP
Change the set temperature of the Pre-heater and Print-heater built
in the platen.
<LOCAL . 1>
FUNCTION
FUNCT I ON
SET UP <ENT>
ENTER
SET UP
SELECT : TYPE1
ENTER
[1]
HEATER < e n t >
ENTER
PRE PRT
3 5°C 4 0°C
Set temperature ： 20 ~ 50°C
END
END