MIMAKI UJV-160 - Local>And<Remote

1-15
1
Before Use
<LOCAL>and<REMOTE>
<LOCAL> and <REMOTE> are shown on the display of this machine.
LOCAL
When <LOCAL> is diplayed, the followings can be set.
All keys are available.
It receives the data from the computer. However, drawing is not executed.
• Set the drawing origin or drawing area with the Jog keys.
• Execute “Test drawing” with the key.
• Execute “Head cleaning” with the key.
• Execute function settings with the key.
• Set the temperature of the heaters with the key.
• Check the remaining amout of ink, the model name, the firmware version, and so on with the the
key.
• Switch between [REMOTE] and [LOCAL] with the key.
• Erase the drawing data that this machine has received with the key.
• Change the user type with the key.
• Activate [ST.MAINTENANCE] of the [MAINTENANCE] directly with the key.
REMOTE
When <REMOTE> is displayed, the received data is drawn.
Press the key to suspend this machine and to return to [LOCAL].
Press the to start <REMOTE>.
<LOCAL . 1>
*REMOTE. 1*
CLEANING
FUNCTION
HEATER
ENTER
REMOTE
DATA CLEAR
USER TYPE
ST.MAINTE
REMOTE
REMOTE