MIMAKI UJV-160 - Setting the Cleaning Operation While the Power Is Turned off

Setting the Maintenance Performed while the Power Is Turned off
4-23
4
How to care
Setting the cleaning operation while the power is turned off
The printer starts and performs the cleaning operation at intervals set beforehand (OFF/4 to 48 hours) while
the power is turned off. (Sleep cleaning function)
1
When <LOCAL> is displayed, press the
key.
2
Select the [MAINTENANCE] with the
key, and press the key.
3
Select the [
SLP.MAINTENANCE
] with the
key, and press the key.
4
Select the [
CLEANING
] with the
key, and press the key.
5
Set the intervals that cleaning operations
are performed with the key, and
press the key.
• Cleaning intervals
OFF : Cleaning operations are not performed while the power is turned off.
4 ～ 48 : The printer starts and performs the flushing operation automatically at set intervals
(4 to 48 hours).
6
Select the cleaning type (NORMAL/
HARD) with the key, and
press the key.
7
Select cleaning or not for each head,
and press the key.
(1) Select the head with the key.
(2) Select cleaning or not (“*” marked) with the key.
8
Press the key to finish.
• When the sleep maintenance function is enabled, the carriage moves to the flushing tray while the
power us turned off. Do not place any objects on the platen while the power is turned off.
<LOCAL . 1>
FUNCTION
FUNCT I ON
MA I NTENANCE < ENT >
ENTER
MA I NTENANCE
SLP .MA I NTENANCE<en t >
ENTER
SLP .MA I NTENANCE
CLEAN I NG <en t >
ENTER
SLEEP CLEANI NG
INTERVAL: 24h
ENTER
SLEEP CLEANI NG
TYPE : HARD
ENTER
SLEEP CLEANI NG
HEAD : MMCCYYKK
ENTER
END