MIMAKI UJV-160 - Subtank Maintenance

Drawing an image from data
2-40
Subtank Maintenance
Execute following procedures when an error about subtank ( P.5-6 Error 148) occurs, or when the
nozzle is not unclogged after cleaning.
1
When <LOCAL> is displayed, press the
key.
2
Select the [MAINTENANCE] with the
key, and press the
key.
3
Select the [SUBTANK MAINTE] with the
key, and press the
key.
4
Set execution of subtank maintenance,
and press the key.
(1)Select the head with the key.
(2)Select execution of subtank maintenance with the key.
• If Error 148 occurs, an appropriate head is selected. Press key.
5
Press the key.
• Subtank maintenance starts.
<LOCAL . 1>
FUNCTION
FUNCT I ON
MA I NTENANCE < ENT >
ENTER
MA I NTENANCE
SUBTANK MA I NTE<e n t >
ENTER
SUBTANK MA I NTE
HEAD : * * C * * Y * *
ENTER
ENTER
SUBTANK MA I NTE
EXECUTE : en t
ENTER