MIMAKI UJV-160 - Adjusting the Head Height

2-26
Adjusting the head height
Adjust the head height according to the thickness of the media used.
1
Set a media.
• Set a media. ( P.2-12, P.2-18, P.2-20 )
2
Attach the Y bar handle to turn to the
right.
• Turn the handle to the right to raise the Y bar above
the set media.
3
Move the carriage to the platen.
• When the power is on :
Move the carriage with the keys.
• When the power is off :
Move the carriage with hand.
4
Adjust the height of the Y bar with the
height adjustment stick.
• Pushing the height adjustment stick, turn the Y bar
handle until the top of the stick touches the media
surface.
• Turn the handle to the right to raise the Y bar, and
turn the handle to the left to lower the Y bar.
• To move the carriage, push the handling part. ( P.2-27)
• Be careful not the media to be lifted.
Carriage
Height
adjusmtment stick