Installing this machine
1-3
1
Before Use
Working Environmental Temperature
Use this machine in an environment of 15 to 35°C to ensure reliable drawing.
Depending on the ambient temperature, the heater temperature may not rise to the set value.
Moving this machine
Move this machine according to the following steps when this machine is required to move on the step-free
same floor.
1
Release the lock of caster.
2
Move this machine as shown in the
figure.
• For safety, be sure to work it with more than 2
persons.
• Do not push the cover to move this machine since
the cover may be deformed.
3
Lock the caster.
• When moving this machine, take care not to give a significant impact on it.
• Be sure to lock the caster after moving of this machine.
To Next Page
Loading...
