MIMAKI UJV-160 - Cleaning Swab

Wiper cleaning
4-28
5
Wipe out the dirt of the wiper with the
cleaning swab.
• Wipe the places shown in the right.
6
If sponges are dirty, replace the
sponge.
• Remove the sponge with tweezers or the like,
then set the provided new sponge.
7
Wipe the the dirt of the wiper rubber
with the cleaning swab.
• Wipe the places shown in the right.
• If the dirt is heavy, replace the rubber. (SPA-
0168)
8
After cleaning, press the key.
• Initializing starts.
9
Press the key to finish.
WI PER CLEAN
COMP L E T ED : e n t
ENTER
END