MIMAKI UJV-160 - Initializing the Settings

3-19
3
Useful Function
Initializing the settings
Initializes the print condition settings.
1
When <LOCAL> is displayed, press the
key.
2
Press the key.
3
Press the key.
4
Select the [SETUP RESET] with the
key, and press the
key.
5
Press the key.
• The settings are reset.
6
Press the key to finish.
• This initializes only the set items.
<LOCAL . 1>
FUNCTION
FUNCT I ON
SET UP <ENT>
ENTER
SET UP
SELECT : TYPE1
ENTER
[1]
SETUP RESET <en t >
ENTER
[ 1 ] SETUP RESET
INITIALIZE OK? :ent
ENTER
END