MIMAKI UJV-160 - Detect the Media Width

2-28
Detect the media width
Depending on the setting contents of “Setting the media width ( P.3-18)”, the method for detecting media
differs. When the setting value of “MEDIA WIDTH” is 100 to 1620mm, detect the media with the procedures
in "Media detecting method (detecting width manually)". The default value of “MEDIA WIDTH” is “AUTO”,
and the media is detected automatically.
(Supported from the firmware ver.2.00)
Media detecting method (detecting width automatically)
1
Depending on the set media, press the
jog key and .
2
Start automatic detection of media
width.
• Wait for a while until the detection operation is completed.
• When you selected “LEAF”, the rear edge of the media will be also detected.
3
The size of the detected media is
displayed.
• After a while, the mode returns to the local.
MED I A SE L ECT
ROL L < > L EA F
DETECTING WIDTH
PLEASE WA I T
** MEDIA **
X=**** y=****