MIMAKI UJV-160 - Changing the Print Origin

2-30
Changing the print origin
The print start position (origin) can be changed.
1
when <LOCAL> is displayed, press the
one of keys.
• Origin setup screen is displayed.
2
Move the head with the one of
keys.
• Move the head to the origin setting position to set
the origin.
3
Press the key .
• The origin is changed.
• Set the origin in accordance with the ORIGIN marks on the machine.
• The origin set here is cleared by turning the power off.
<LOCAL . 1>
OR I G I N SE T UP
500 . 0 600 . 0
Origin position
(back and forth)
Origin position
(right and left)
OR I G I N SE T UP
** ORIGIN **
ENTER
ENTER