MIMAKI UJV-160 - Page 61

Setting media
2-31
2
Basic Operations
The guide for the print origin position
The print start position (origin) in the depth direction (X') is located at the ORIGIN mark.
The origin in the scanning direction (Y') is positioned at 10 mm from the right end of the media.
Changed the setting from [MARGIN] in SET UP menu. This can be also changed with the Jog key.
Set X’ and Y’origin position in accordance with the two ORIGIN marks on the machine.
ORIGIN↓
ORIGIN
↓
at ORIGIN mark
(X')
10 mm
(Y')