MIMAKI UJV-160 - Setting Nozzle Face Cleaning Time

4-16
Setting nozzle face cleaning time
When set times of drawing are completed, nozzle face of the head is cleaned automatically to remove ink
droplets on the nozzle face.
1
When <LOCAL> is displayed, press the
key.
2
Select the [MAINTENANCE] with the
key, and press the
key.
3
Select the [INT. MAINTENANCE] with
the key, and press the
key.
4
Select the [INTERNAL WIPING] with the
key, and press the
key.
5
Set the number of printing times (OFF /
1 to 100) with the key, and
press the key.
• When [OFF] is set, periodical wiping is not executed.
6
Press the key to finish.
<LOCAL . 1>
FUNCTION
FUNCT I ON
MA I NTENANCE < ENT >
ENTER
MA I NTENANCE
INT.MAINTENANCE<ent>
ENTER
INT.MAINTENANCE
INT.WIPING <ent>
ENTER
INT.WIPING
PR I NT COUNT = OFF
ENTER
END