MIMAKI UJV-160 - Cancelling the Drawing

2-39
Drawing an image from data
2
Basic Operations
Cancelling the drawing
To stop the drawing, stop the drawing operation and erase the received data from this machine.
1
Press the key while drawing.
• Drawing operation stops.
• When a data is being sent from the computer, stop
sending data from the computer.
2
Press the key.
3
Press the key.
• Received data is cleared and <LOCAL> is dis-
played.
*REMOTE. 1*
2.5mm
REMOTE
<LOCAL . 1>
DATA CLEAR
DATA CLEAR
<ENT>
ENTER