MIMAKI UJV-160 - If Blur or Missing Remains; Subtank Maintenance

4-25
4
How to care
If blur or missing remains
When blur or dot missing does not improve after head cleaning, perform subtank maintenance.
Subtank Maintenance
1
Insert an ink cartridge into the ink
station.
• Insert an ink cartridge firmly.
2
When <LOCAL> is displayed, press the
key.
3
Select the [MAINTENANCE] with the
key, and press the
key.
4
Select the [SUBTANK MAINTENANCE]
with the key, and press the
key.
5
Select execution of subtank mainte-
nance for each head, and press the
key.
(1) Move the cursor with the key.
(2) Select filling ink or not with the key.
• Select for all the heads.
Execute subtank maintenance ：Number of the set ink cartridge is displayed.
Not execute subtank maintenance ：“*” is displayed.
6
Press the key.
• Subtank maintenance starts.
• Depending on the subtank condition, the slider continuously moves from side to side with
buzzer sound.
7
When subtank maintenance is completed, press the key to
finish.
• To replace ink, see P.4 - 5 .
<LOCAL . 1>
FUNCTION
FUNCT I ON
MA I NTENANCE < ENT >
ENTER
MA I NTENANCE
SUBTANK MA I NTE . <e n t >
ENTER
SUBTANK MA I NTENANCE
HEAD : MM
C CYYKK
SUBTANK MA I NTENANCE
HEAD : MM
* CYYKK
ENTER
SUBTANK MA I NTENANCE
EXECUTE
：
en t
ENTER
END