MIMAKI UJV-160 - Page 80

Setting media compensation
3-10
5
Press the key twice to start
print.
• The machine scans for UV irradiation to cure ink on the drawn pattern. ( P.3-23)
6
Check the compensation pattern, then
input the correction value with the
or key.
" + " : A space between two lines widens.
" - " : A spacing between two lines narrows.
• The band moves by approx. 0.1mm each time changing the correction value by "10".
7
Press the key to finish.
[1]
MED I A COMP . < e n t >
ENTER
[1]MEDIA COMP.
ADJUST = 0
END