MIMAKI UJV-160 - Page 107

Avoiding ink dripping at printing
4-11
4
How to care
8
Dip the cleaning swab into the cleaning
solution, and clean the side surface of
the head.
• Do not wipe the nozzle face of the head. It may
cause nozzle clogging.
• To buy special cleaning swabs, contact a distributor
in your district or our office.
9
After cleaning, press the key.
• Initializing starts.
10
Set the covers and the tray removed at
Step 2 and 3.
• In the reverse order of Step 2 and 3, set the front cover, the waste ink tray, and the waste
ink tray cover.
11
Press the key to finish.
Bottom of the carriage
ST .MA I NTENANCE
COMP L E T ED : e n t
ENTER
END