MIMAKI UJV-160 - Page 133

5-5
Troubles displaying messages
5
In Case of Trouble
Message Solution
• Set a media to the left.
• Execute Station maintenance and execute Dispose of the ink in the wiper
tank. ( P.4-14)
• Call a distributor in your district or our office.
• Check the amount of water in the hot water tank, and fill as needed.
( P.4-30)
• The remaining media is low. Set a new media.
• Position a data in the drawing area.
• Call a distributor in your district or our office.
• Select the other ink set.
• Wait until the protection process finishes and “ERROR 149” is displayed.
MED I A POS I T I ON
WI PER TANK FULL
HD DATA SEQ
WA T E R L A C K
SCAN X RANGE OVER
RANGE OVER XY
RANGE OVER X
RANGE OVER Y
CARTR I DGE ON / OFF
OTHER I NKSET SE L ECT
! I NK UPSTREAM
GUARD : MMCCYYKK